Load Pro Series

Load Pro Series

LP-35

  • Heaviest Loads
  • 4-Leaf Stack
  • 3500 lbs. Level Load Capacity
  • Available in Progressive or Constant Rate
  • Offers the Maximum in Carrying Capacity
  • Recommended for 3/4 Ton and 1 Ton Applications
  • Mounting kit sold separately

LP-25

  • Heavy Loads
  • 3-Leaf Stack
  • 2500 lbs. Level Load Capacity
  • Progressive Rate Design is Fully Adjustable
  • Design can handle the load 24/7
  • Mounting kit sold separately

About The Load Pro Series

This Hellwig Helper Spring set the standard for all other aftermarket helper springs. Featuring Progressive Spring Rate and Fulltime Spring Rate design, this spring is the workhorse of the Hellwig Spring line. With the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig Spring, therefore as the vehicles load increases the Hellwig Helper Spring progressively increases its resistance to the load. In the Fulltime design the Hellwig Spring immediately reacts to the vehicles load, therefore compressing very little as load is applied to the vehicle.

Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturer’s Gross Vehicle Weight Rating. Designed to install on full size pick-up trucks and vans, this unit requires mounting hardware to accommodate 2 1/2″ or 3″ wide leaf springs. When ordering be sure to identify the spring kit and the appropriate mounting hardware kit to complete the installation. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. “Set it and forget it”. The LP 25 is rated at 2500lbs level load carrying capacity and the LP 35 is rated at 3500lbs level load carrying capacity, not exceed the vehicles Gross Vehicle Weight Rating.

Heavy Duty Load Control Applications

Download Instructions for this product

Notes:

*Progressive Rate Listed – Call for Constant Rate Applications

  1. Must Remove Factory Overload Contact Springs
  2. Can also use 6400 if not equipped with fifth wheel hitch
  3. Installs in place of factory contact overload spring
  4. Requires drilling
  5. Step Bracket Style Leaf
  6. Can also use 1801 for step bracket style leaf
  7. Leaf & Mounting Kit Packaged Together
  8. Mounting kit sold separately, see line below for your mounting hardware
  9. Must remove factory springs or use 9703